Metra 99-3303 Instrucciones De Instalación página 3

5. Unclip and remove the side panel from
the driver's side of the dash with the door
open, and remove (2) 7mm screws from
behind the panel. (Figure E)
6. Remove (2) 7mm screws from the
bottom of the glove box. Open the box
and squeeze the sides together to open
it further, and then remove the remaining
(4) 7mm screws. Unclip the black vent
cover under the glove box, then unclip
and remove entire glove box assembly.
(Figure F)
7. Unclip and remove the trim panel
surrounding the radio and climate
controls. (Figure G)
8. Remove (4) 7mm screws from the radio,
and (2) 7mm screws from the climate
control to remove the radio. (Figure H)
Continue to kit assembly
Dash Disassembly
Chevrolet Malibu/Malibu Maxx 2004-2007
Malibu Classic 2008
(Figure E)
(Figure F)
99-3303
(Figure G)
(Figure H)
3