Metra 99-3012G-LC Instrucciones De Instalación

KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8" Phillips screws • E) (4) Panel clips
• F) Axxess interface and wiring harness (not shown)
A B
Metra. The World's Best Kits.
®
Chevy Sonic 2012-2016
Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle
specific applications
KIT FEATURES
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
• Painted gray to match the factory finish
C
MetraOnline.com
D E
© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
99-3012G-LC
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation .......................................................2
Kit Assembly
-ISO DIN radio provision with pocket ..................3
-ISO DDIN radio provision .....................................3
Axxess Interface Installation .................................4
Final Assembly .......................................................6
WIRING & ANTENNA CONNECTIONS
Wiring Harness: Axxess interface and harness included
Antenna Adapter: 40-EU55 (sold separately)
Steering Wheel Control Interface: ASWC-1
(sold separately)
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 9/32" socket wrench
Attention!
Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
REV. 2/28/19 INST99-3012G-LC