Chevrolet Cobalt (With Onstar) 2005-2006 - Metra 99-3303 Instrucciones De Instalación

1. Unclip and remove the trim panel
from above the glove box. (Figure A)
2. Unclip the upper edge of the panel
below the steering column and let
hang.
Note: It is not necessary to remove
the panel. (Figure B)
3. Unclip and remove the small trim
panel to the right of the ignition
switch. (Figure C)
4. Unclip and remove the trim panel
surrounding the radio and climate
controls. (Figure D)
5. Remove (4) 7mm screws securing
the radio and then remove. (Figure E)
6. Cut and remove top mounting tabs
on each side of the radio housing.
(Figure F)
Continue to kit assembly
Dash Disassembly

Chevrolet Cobalt (with OnStar) 2005-2006

(Figure A)
(Figure B)
99-3303
(Figure C)
(Figure D)
5
(Figure E)
Cut the
two top
holes off
(Figure F)