Dash Disassembly; Mitsubishi Eclipse/Eclipse Spyder 2006-2012; Kit Assembly; Radio Housing Assembly - Metra 99-7010 Instrucciones De Instalación

Dash Disassembly

Mitsubishi Eclipse/Eclipse
Spyder 2006-2012
1. Unclip and remove the trim panel
including the radio A/C vents.
(Figure A)
2. Remove (4) Phillips screws
securing radio chassis to dash to
remove. (Figure B)
3. Unclip and remove the A/C vents
from the factory radio trim panel.
(Figure C)
4. Unclip and remove the hazard
switch from the factory radio trim
panel. (Figure D)
Continued on next page
(Figure A)
(Figure B)
(Figure C)
REAR VIEW
(Figure D)

Radio housing assembly

1. Clip the A/C vents into the 99-7010
radio housing. (Figure A)
2. Clip the hazard switch into the
99-7010 radio housing. (Figure B)
Continued on next page
2

Kit Assembly

(Figure A)
(Figure B)