Din Radio Provision With Pocket; Iso Din Radio Provision With Pocket - Metra 99-7010 Instrucciones De Instalación

DIN radio provision with pocket

1. Slide the DIN cage into the kit
and secure by bending the metal
locking tabs down.
(Figure A)
2. Slide the aftermarket radio into the
cage and secure. (Figure B)
3. Snap the pocket into the kit.
(Figure B)
4. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the radio for proper operation.
5. Reassemble dash in reverse
order of disassembly.
Kit Assembly
(Figure A)
(Figure B)

ISO DIN radio provision with pocket

1. Mount the ISO brackets to the
radio with the screws supplied
with the radio. (Figure A)
2. Slide the radio into the kit until the
side clips engage.
3. Snap the ISO trim plate into the
radio housing. (Figure B)
4. Snap the pocket into the kit.
(Figure B)
5. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the radio for proper operation.
6. Reassemble dash in reverse
order of disassembly.
3
(Figure A)
Right side clip
(Figure B)