Makita VC3012L Manual Original página 18

D
Makita VC3012L
GB
Fault
F
NL
‡ No suction power during wet
I
cleaning
‡ Voltage fluctuations
N
S
DK
SF
For European countries only:
E
EC Declaration of Conformity
P
Makita declares that the following Machine(s):
Designation of the Machine: Wet and dry vacuum cleaner
GR
Model No./Type: VC3012L
Conforms to the following European Directives:
TR
2006/42/EC, 2014/30/EU, 2011/65/EU
They are manufactured in accordance with the following Standard or standardized documents:
SLO
EN 60335-1: 2012 + A11:2014, EN 60335-2-69:2012
The Technical file in accordance with 2006/42/EC is available from:
HR
SK
CZ
PL
H
RO
BG
RUS
EST
LV
LT
AL
MK
SR
UK
18
> Filter element is clogged.
> Tank is full (floater closes the
suction opening).
> Impedance of power supply is
too high.
Makita Europe N.V., Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium
Makita Europe N.V., Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium
Cause
06.06.2016
Yasushi Fukaya
Director
Remedy
• See section "Cleaning the filter
element" and "Replacing the
filter element".
• Switch off the cleaner. Empty
the tank.
• Use a suitable extension cord
(see section "Technical data").
• Connect the cleaner to another
socket closer to the fuse box.
Voltage fluctuations over 7
% should not occur if the
impedance at the transfer point
is ≤ 0.15 Ω.