Dash Disassembly; Nissan Versa 2007-2011; Kit Assembly; Din Radio Provision With Pocket - Metra 99-7603 Instrucciones De Instalación

Dash Disassembly 99-7603

Nissan Versa 2007-2011

3. Remove (4) Phillips screws
securing radio, unplug and remove
radio. (Figure D)
4. Remove (4) Phillips screws
securing each bracket to factory
radio. (Figure E)
Note: Retain these brackets to be
re-used during double DIN or
stacked ISO kit assembly.
Continue to kit assembly
(Figure E)
RADIO
PRESET A-B-C CD
LOAD
DISP CLOCK
6CD CHANGER
1 4 RPT
SCRL
RDM
SEEK
TUNE
2 5
TRACK AUDIO PUSH
AUX FF-REW
PWR
FILE
FOLDER
3 6
SCAN VOL
CAT
CH
(Figure D)

Kit Assembly 99-7603

DIN radio provision with pocket

Note: You will need to remove the
aftermarket radio's trim ring if equipped.
1. Slide the DIN cage into the radio
housing and secure by bending the
metal locking tabs outward.
(Figure A)
2. Slide the aftermarket radio into the
cage until it snaps into place.
(Figure B)
3. Attach the trim plate supplied with
the kit to the front of the radio
housing assembly. (Figure B)
4. Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Re-connect the negative
battery terminal and test the radio for
proper operation.
5. Reassemble dash in reverse order
of disassembly.
3
(Figure A)
(Figure B)