Dash Disassembly - Metra 99-7807 Instrucciones De Instalación

1. Unclip and remove the trim panel
from above the glove box at the
right side of the factory radio.
(Figure A)
2. Unclip and remove the trim panel
at the left side of the factory radio.
(Figure B)

Dash Disassembly

(Figure A)
(Figure B)
99-7807
3. Remove the (2) Phillips screws
from the left and right side of the
of the factory radio. (Figure C)
4. Unsnap and remove the factory air
vents above radio. (Figure D)
Continued on next page
2
(Figure C)
(Figure D)