Dash Disassembly; Kit Assembly - Metra 99-9000 Instrucciones De Instalación

Dash Disassembly

All Vehicles
1. If an "open back" installation is
desired (for additional depth), cut
the Underdash Housing along the
scored line and remove the rear
portion of the Housing. (Figure A)
Continue to kit assembly
(Figure A)
99-9000
DIN head unit provision
1. Slide the DIN cage into the kit
and secure by bending the metal
locking tabs down.
2. Slide the aftermarket head unit into
the cage until secure. (Figure A)
3. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS.
2

Kit Assembly

(Figure A)