Transport And Storage - Husqvarna V-61 Manual De Instrucciones

Ear muff sizes and helmet combinations
These hearing protectors are only approved for and may
only be used for the following safety helmets.
The helmet cups' standard bracket fits directly on the
following helmets:
Hearing
Helmet, model
protection
JSP Invincible MK2
XLS Type 2
EVO
WARNING! Hearing protectors/protective
!
helmet combinations that meet EN 352-3
are classified in size classes, small (S),
medium (M) and large (L). Combinations
of medium sizes fit most users. Small
and large are intended for users where
medium sizes are not appropriate.
Mesh visor
• Hook the visor on the attachments on the visor holder.
(Figure 10)
• Fasten the visor against the edge of the holder.
(Figure 11)
• Lock the visor by pushing the corners over the locking
device. (Figure 12)
• Slide the visor arms into the attachments on the
hearing protectors and adjust the visor arm to the
correct position. (Figure 14) See table for sizes.
• Lubricate the turning mechanism if necessary. (Figure
13)
Visor Helmet, model
V-61 JSP Invincible MK2 EVO
Product user guide
Size class
L (see the
warning text
below)
Size A
39 mm / 1 9/16"
Maintenance
Hearing protectors
The hearing protectors, and especially the sealing rings,
can become worn from use and aging. Check the hearing
protectors regularly for cracks or leakage.
The protector cups, sealing ring and absorbent can be
easily cleaned with soap and water.
Worn and damaged parts can easily be replaced (see
Figure 9).
The sealing rings are filled with foam and are replaceable.
Make sure the extruding part of the sealing ring is pointed
downwards during assembly.
Use only hygiene kits from the manufacturer,
art. no. 505 66 53-26.
This product may be damaged considerably by certain
chemicals. Additional information is provided by the
manufacturer.
Mesh visor
The product is made from plastic material of high quality.
However, plastic material may age prematurely if exposed
to intense UV light, e.g. prolonged exposure to direct
sunlight.
If the product seems to be fragile or has been used for
over 3 years it should be discarded.
Maintenance, wear and disposal
The condition of the protective equipment should be
checked regularly. A damaged equipment should always
be replaced.
Follow local regulations for disposal and recycling.

Transport and storage

When the helmet is not in use, fold the hearing protectors
downward and inwards. (Figure 8)
Protect the equipment from external impact during
transport.
Keep the hearing protectors clean and dry and store them
at room temperature.
Do not store the equipment in places where it can be
exposed to extreme sunlight, such as behind a window.
–
English 17