Technical Data - Husqvarna V-61 Manual De Instrucciones

Technical data

Responsible manufacturer: Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel +46 36 14 65 00
Hearing protectors
The following standards have been applied: EN 352-3:2002 Attenuation values according to EN 24869-1.
Sound damping values
Hearing protector: XLS Type 2
Notified body:
2279, Combitech AB, Änkhusgatan 9, Box 1017, SE551 11 Jönköping, Sweden.
Tested and approved in compliance with EN 352-3 Attenuation values according to EN 24869-1.
Frequency, Hz
Mean attenuation, dB
Standard deviation, dB
APV – expected attenuation, dB
H=31 dB, M=25 dB, L=18 dB, SNR=27 dB, Weight: 212 g
Material
Part
Cover
Washer
Sealing ring
Mesh visor
V-61
The following standards have been applied: EN 1731:2006.
Notified body: 0403, Finnish Institute of Occupational Health, Work Environment Developement, Protection and Product
Safety, Topeliuksenkatu 41a A, FI-00250 Helsinki, Finland.
The product is labelled with information regarding performance and areas of application.
IMPORTANT! If visors and holders do not have the
same terms for use, the lower performance level should
apply for the protective equipment in its entirety.
Definition of label
V-61 Model
The product complies with the specified standard (the standard specifies suitable areas of
EN 1731:2006
application)
Increased mechanical strength. (Can withstand a 22 mm steel ball hitting the visor with a speed of
S
5,1 m/s.)
CE This product is in accordance with applicable EC directives.
18 – English
Technical data
125 250
15,5 18,9
3,5 3,1
12,0 15,8
Material
ABS
ABS
Polyurethane, PVC
500 1000
25,5 29,8
3,4 2,2
22,1 27,6
Part
Absorbent
Arm and bracket
2000 4000 8000
32,4 38,6 39,5
3.8 3.0 4.6
28,6 35,6 34,9
Material
Polyurethane
Polyamide