Setting Up Your Ir Emitter - Bose LIFESTYLE 550 Guia Del Usuario

Symptom
Cannot play Bluetooth audio On your system:

Setting up your IR emitter

If you are having issues with the responsiveness of your remote and your connected
devices, Bose recommends using the provided IR emitter.
Note: Use the IR emitter only if you are having remote control issues from a third
party device.
1. Remove the IR emitter from box
2. Insert the emitter into the IR connector on the back of the console.
3. Remove three adhesive pads from the plastic sheet included with the emitter and
place them on the flat bottoms of the three emitter beads.
Solution
• Connect a mobile device using the Bluetooth SOURCE screen.
• Clear the system's pairing list using the remote control:
- In the Bluetooth source, press the MORE button
your remote.
- Select Clear Pairing List.
• Try connecting a different mobile device.
On your mobile device:
• Disable and re-enable the Bluetooth feature.
• Remove the system from the Bluetooth menu. Connect again.
• Refer to your device's documentation.
• See "No sound from the system" on page 31.
Emitter bead
T R O U B L E S H O O T I N G
.
on
E N G L I S H - 3 3