Radio Function - auna Silver Star CD Cube Manual De Uso

EN
32

RADIO FUNCTION

• Select [FM mode] on the main display screen with the navigation knob
or with the navigation buttons on the remote. Once selected, the FM
mode will start on 87.5MHz.
• To save all stations with strong signal, press the navigation knob, it will
show [auto scan?] choose YES. Then it will start auto scan. Once the
auto-scan is complete, stations will be saved in your favorites.
• You will then be able to browse through these saved stations by press
the Fav button then press [<] or [>] to skip between saved stations.
• To manually scroll through FM frequency, simply press the [<] or [>]
buttons to go backwards or forwards through the frequency wave.
Pre-setting your favorite FM stations
• To save presets manually, select and listen to the station frequency
number for the station you wish to save.
• Follow by holding down the FAV button for 1-2 seconds and the number
[01] will display on the screen. Use the navigation knob to browse
through preset numbers (up to 99) and select the preset number you
wish to save it as by pressing the navigation knob.
• There are 4 separate preset buttons (1-4) on main unit which you can
press and hold each of them to store your 4 favorite FM stations quickly.
Recalling preset FM stations
• View your favorite FM stations when you are on FM mode by simply
selecting the 'Fav' button and begin scrolling through saved stations.
• There are 4 separate preset buttons (1-4) on main unit which you can
simply press each of them to recall your 4 favorite FM stations quickly.