Installation Instructions; Before You Begin; Downdraft Vent System - GE JVB37 Manual Del Propietario E Instrucciones De Instalación

Installation
Instructions
If you have questions, call 800.GE.CARES or visit our Website at: ge.com

BEFORE YOU BEGIN

Read these instructions completely and
carefully.
IMPORTANT
•
instructions for local inspector's use.
IMPORTANT
•
governing codes and ordinances.
• Note to Installer – Be sure to leave these
instructions with the Consumer.
• Note to Consumer – Keep these
instructions for future reference.
• Note – This appliance must be properly
grounded.
• Proper installation is the responsibility of
the installer.
• Product failure due to improper installation
is not covered under the Warranty.
TOOLS YOU WILL NEED
Flat-blade screwdriver
Pliers
Jig saw
— Save these
— Observe all
Carpenter square
Duct tape
Ductwork to suit
the installation
Downdraft Vent
System
REMOVE PACKAGING
Open the carton and remove parts package.
Check contents to be sure all pieces are
present. (The parts package may be attached
to the power cord.)
Remove the shipping materials. Remove the
carton and set aside. The carton can be used
as a pad when changing or adjusting vent
direction.
PARTS INCLUDED
Remote raise/lower assembly (for 36" models only)
Wire box (2)
and screws (4)
Switch cover
plate (1)
6
Stabilizing brackets
(all models) (4)
Plastic strain Wire and white
relief (2) connector (1)
Attachment
bracket (1)