AKG MicroMic C417 III Modo De Empleo página 23

Type:
Polar pattern:
Frequency range:
Sensitivity at 1 kHz:
Impedance:
Recommended load impedance:
Max. SPL for 1%/3% THD:
Equivalent noise level:
Power requirement:
Current consumption:
Cable length/Connector:
Finish:
Size:
Net/shipping weight:
This product conforms to the standards listed in the Declaration of Conformity.
To order a free copy of the Declaration of Conformity, visit http://www.akg.com
or contact sales@akg.com.
Frequency Response
6 Specifications
pre-polarized condenser microphone
omnidirectional
20 Hz to 20,000 Hz
10 mV/Pa (-40 dBV re 1 V/Pa)
200
2000
118/126 dB SPL
34 dB (A) (to IEC 60268-4)
III
C 417 PP: 9 to 52 V universal phantom power
III
C 417 L/PL: B 29 L battery power supply,
MPA III L phantom adapter, or
AKG WMS bodypack transmitters
approx. 2.2 mA
III
C 417 PP: 3 m (10 ft.) / 3-pin male XLR
III
C 417 L/PL: 1.5 m (5 ft.) / 3-pin mini XLR
matte black (PP, L) or flesh-color (PL)
7.5 x 15 mm (0.3 x 0.6 in.)
III
C 417 PP: 8 g (0.3 oz.) / 220 g (7.8 oz.)
III
C 417 L/PL: 8 g (0.3 oz.) / 160 g (5.6 oz.)
Polar Diagram
23