MSA BD mini Instrucciones De Funcionamiento página 14

USING THE COMPRESSED AIR BREATHING APPARATUS
(3) Button the hip belts with the slides J into the slots E in such a way that the
slots H point upwards.
(4) Pull the "short" carrying straps through the belt loops (see Fig. 1) of the hip
belt.
▪
The metal slide and the Z-seam holds the belt assembly.
(5) Push the pressure gauge line and the medium pressure line through the
strap L and fix in place with hose retainer on the shoulder strap.
3.3.2. Back Carrying method with Inclined Cylinder
The compressed air breathing apparatus is supplied ex-works as shown in Fig. 1.
The method of carrying is as shown in Sections 3.2.3 and 3.2.4. The carrying
straps "long" and "short" are not required and are designated as the shoulder
strap.
3.3.3. Hip Carrying Method Front/Back
The method of carrying is as shown in Sections 3.2.5 and 3.2.2.
(1) Button the hip belts with the slides J into the slots E in such a way that the
slots H point upwards.
(2) Button a shoulder strap into the slots G1 and G2.
(3) Pressure gauge line and medium pressure line to be fixed as required with
strap L on the slide K.
3.3.4. Hip Carrying Method Side
The method of carrying is in accordance with the illustration in Section 3.2.6.
(1) Mount the hip belt with the slides J and K as described in Section 3.3.1.
3.3.5. Shoulder Carrying Method
The method of carrying is in accordance with the illustration in Section 3.2.6.
(1) Button just one shoulder strap into the slots G1 and G2.
14
(1) Button the hip belts with the slides J into the slots F
in such a way that the slots H point downwards.
(2) Push the strap L through G4 and secure with slide K
(see illustration).
BD mini
MSA
GB