Installation Procedure For Windows 2000 - Belkin F5U220 Manual Del Usuario

Installation Procedure for Windows 2000

This installation procedure will install two USB 1.1 Host Controllers and one
USB 2.0 Enhanced Host Controller.
(1) Windows will detect "NEC PCI to USB Open Host Controller" The
required driver support will be automatically installed. No user
input is required. This will repeat one more time
(2) Windows will detect "Universal Serial Bus (USB) Controller". This is
the USB 2.0 EHCI Host controller.
The "Found New Hardware Wizard" window will appear. Select "Search for a
suitable driver for my device (recommended)" and click "Next".
(3) Check the "CD-ROM drives" box. Click "Next".
(4) Windows will find "Belkin USB 2.0 Hi-Speed Host Controller". Click
"Next".
(5) Windows will now install the Enhanced Host Controller driver. Click
"Finish".
Installation is now complete.
Driver Installation
EN
7 7