Driver Installation; Installation Procedure For Windows 98Se - Belkin F5U220 Manual Del Usuario

Installation Procedure for Windows 98se

This installation procedure will install two USB 1.1 Host Controllers and one
USB 2.0 Enhanced Host Controller.
(1) Windows will detect "NEC USB Open Host Controller" and the "Add
New Hardware" dialog box will open.
Click "Next".
(2 Select "Search for the best driver for your device" and click
"Next".
(3) Uncheck all the boxes and Click "Next".
(4) Windows will find the driver for "NEC USB Open Host Controller".
Click "Next".
(5) Windows may ask you for the Windows installation CD. If asked,
insert the CD into the CD-ROM Drive and follow the prompts.
(6) After Windows installs the required drivers, installation of the first
USB 1.1 Host Controller is complete.
Click "Finish".
(7) The Add New Hardware Wizard will repeat the installation process
for the second USB 1.1 Host Controller.

Driver Installation

EN
5 5