Powerworks 2400113 Manual De Utilización página 2

EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SL HR HU RO BG EL AR TR HE LT LV ET
SPECIFICATIONS
Type
Voltage
Air volume
Air speed
Weight (Battery
Pack not included)
Battery Pack
Charger
Sound pressure
level
Guaranteed
sound power level
Vibration level
DESCRIPTION
See Figure 1.
1. Battery Release Button
2. Cruise Control Lever
3. Trigger
4. Blower tube
ASSEMBLY
UNPACKING
„ Carefully remove the product and any accessories
from the box.
„ Inspect the product carefully to make sure no
breakage or damage occurred during shipping.
„ Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
„ If any parts are damaged or missing, please call
your Powerworks service centre for assistance.
Do not use this product if any parts on the Packing
List are already assembled to your product when
you unpack it. Parts on this list are not assembled
to the product by the manufacturer and require cus-
tomer installation. Use of a product that may have
been improperly assembled could result in serious
personal injury.
English (original instructions)
2400113
40V DC
11.05 m³/min
177 km/h
kg
2900113/2900213
2900013
LpA: 87.6 dB(A) K: 3 dB(A)
L : 104 dB(A)
WA.d
a h : <2.5 m/s ; K=1.5 m/s
2
WARNING
PACKING LIST
„ Blower
„ Front Blower Tube
„ Rear Blower Tube
„ Operator's Manual
ASSEMBLING THE BLOWER TUBE
See Figure 2, 3, 4
To prevent accidental starting that could cause seri-
ous personal injury, always remove the batterypack
from the tool when assembling parts.
„ Align either of the grooves (6) on the tube (4) with
the tabs (7) on the blower housing. Slide the tube
onto the blower housing until the tab engages the
grooves.
„ Turn the tube in the direction of the arrow until both
2
of the tabs slide into the lock positions (8).
„ To install the Front tube (A) to Rear Tube (B), line
the hole on the front tube to the tab on the rear
tube. Once aligned slide the front tube on to the
rear tube until the tube is secured.
TO INSTALL/REMOVE BATTERY PACK
See Figure 5.
„ Align the ribs of the battery pack with the mounting
slots in the blower's battery port.
„ Insert the battery into the battery opening until the
battery release button locks into place.
When placing battery pack in the blower, be sure
the raised ribs on the battery pack align with the
grooves in the top of the blower. Make sure the bat-
tery is fully seated, and it latches into place properly.
Improper installation of the battery pack can cause
damage to internal components.
TO REMOVE BATTERY PACK See Figure 5.
„ Press and hold the latch button (1) with firm grip.
„ Grasp the trigger handle (9) firmly. Pull the battery
pack out of the handle.
Always take care of your feet, children, or pets
around you when pressing the battery release but-
ton. Serious injury could result if the battery pack
falls. NEVER remove the battery pack when in a
high location.
1
WARNING
CAUTION
WARNING