Power Supply; Handling - Canon imageRunner ADVANCE C5051 Guía De Usuario

Power Supply

•
Do not damage or modify the power cord . Also, do not place heavy objects on the power cord, or pull on or excessively bend
it, as this could cause electrical damage and result in a fire or electrical shock .
•
Keep the power cord away from a heat source; failure to do this may cause the power cord coating to melt, resulting in a fire
or electrical shock .
•
Do not connect or disconnect the power cord with wet hands, as this may result in electrical shock .
•
Do not connect the power cord to a multiplug power strip, as this may cause a fire or electrical shock .
•
Do not bundle up or tie the power cord in a knot, as this may result in a fire or electrical shock .
•
Insert the power plug completely into the power outlet, as failure to do so may result in a fire or electrical shock .
•
Do not use power cords other than the power cord provided, as this may result in a fire or electrical shock .
•
As a general rule, do not use extension cords . Using an extension cord may result in a fire or electrical shock .
•
Do not use power supplies with voltages other than those specified herein, as this may result in a fire or electrical shock .
•
Always grasp the power plug when disconnecting the power cord . Pulling on the power cord may expose or snap the core
wire, or otherwise damage the power cord . If the power cord is damaged, this could cause current to leak, resulting in a fire or
electrical shock .
•
Leave sufficient space around the power plug so that it can be unplugged easily . If objects are placed around the power plug,
you will be unable to unplug it in an emergency .

Handling

•
Do not attempt to disassemble or modify the machine . There are high-temperature and high-voltage components inside the
machine which may result in a fire or electrical shock .
•
If the machine makes strange noises, or gives off smoke, heat, or strange smells, immediately turn OFF the main power
switch, and disconnect the power cord from the power outlet . Then, contact your local authorized Canon dealer . Continued
use of the machine in this condition may result in a fire or electrical shock .
•
Do not use highly flammable sprays near the machine . If gas from these sprays comes into contact with the electrical
components inside the machine, it may result in a fire or electrical shock .
•
To avoid damage to the power cord and creating a fire hazard, always turn OFF the main power switch, and unplug the
interface cable when moving the machine . Otherwise, the power cord or interface cable may be damaged, resulting in a fire
or electrical shock .
•
Make sure that the power plug is firmly inserted into the power outlet if the machine was moved . Do not use the machine
while the connection is loose, as doing so may cause a fire .
•
Do not drop paper clips, staples, or other metal objects inside the machine . Also, do not spill water, liquids, or flammable
substances (alcohol, benzene, paint thinner, etc .) inside the machine . If these items come into contact with a high-voltage
area inside the machine, it may result in a fire or electrical shock . If these items are dropped or spilled inside the machine,
immediately turn OFF the main power switch, and disconnect the power cord from the power outlet . Then, contact your local
authorized Canon dealer .
•
Do not use the product for uses other than as a color digital multitasking machine .
•
Do not place heavy objects on the machine, as they may tip over or fall resulting in personal injury .
•
Close the feeder/platen cover gently to avoid catching your hands, as this may result in personal injury .
•
Do not press down hard on the feeder/platen cover when using the platen glass to make copies of thick books . Doing so may
damage the platen glass and result in personal injury .
•
Do not touch the finisher while the machine is printing, as this may result in personal injury .
•
Paper that has just been output from the machine may be hot . Be careful when removing or aligning paper from the output
xix