Black and Decker HANDIPREP Express HB5500 Manual Del Usuario página 10

Sistema de cocina 6 en 1
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Note: Do not fill jar above the 500ML mark. The jar can also be used as a
measuring cup.
6.
Unplug the appliance, disassemble the whisk from the motor base and
clean appliance.
WHISK TIPS
• For whipping cream, always use fresh chilled cream
• For egg whites, whisk fresh, room temperature eggs in a glass bowl to
achieve greater and more stable volume.
• It is recommended to use the highest speed when whisking egg whites
and cream.
US IN G THE FO OD P R O C E SSO R BOWL
1.
Determine whether you will be using the S Blade, Slicing and Shredding Disk, or
Emulsifying Disk and refer to the appropriate instructions before proceeding.
Note: Always place the blade or disk into the food processor prior to
placing the food into the food processor. See instructions for each blade/
disk in the following steps.
2.
Place ingredients directly into the bowl. If you do not put the ingredients into the
bowl before attaching the lid, you can feed ingredients through the funnel after
finishing assembly. Do not exceed the maximum (MAX) marking.
3.
If adding ingredients through the funnel, always use the pusher to push ingredients
down, never your hands.
4.
Place the processing bowl lid into position and ensure that it is correctly aligned.
Twist the lid counter-clockwise to lock into place.
5.
Place the funnel into the feed chute and insert the pusher into the funnel.
6.
Insert the motor base into the lid of the food processor and turn clockwise to lock.
7.
Plug in the unit and select the processing speed on the speed control dial.
8.
Press and hold the ON|OFF button to turn the appliance on and start the processing
action.
9.
Slowly add ingredients to the funnel using the pusher as a guide, if using the funnel.
10. When processing has finished, release the ON|OFF button to turn the motor off.
Unplug the appliance.
11.
Always precut large chunks of food to fit the funnel opening.
12. If the blade or disks get blocked, stop and unplug the appliance before clearing.
13. Detach the motor base from the food processor lid by turning counter clockwise
and remove the lid from the bowl by twisting clockwise. Carefully remove the disk
or S Blade and use a spatula to remove any excess food from the disks or blades
and to remove processed food from the bowl.
Note: Always switch off and unplug before cleaning.
Important: the continuous operating time must be less than 30 seconds.
1 0

Publicidad

Tabla de contenido
loading

Tabla de contenido