LG LW1816HR Manual Del Propietário página 13

5.
frame curtain
frame guides.
6.
screws.
1. Open the window. Mark a line on the center of
the window stool .
Loosely attach the sill bracket to the support
bracket using the carriage bolt and the lock nut.
2. Attach the sill bracket to the window sill using
the screws (Type B).
Carefully place the cabinet on the window stool
and align the center mark on the bottom front
with the center hole marked window stool.
3. Using the screw (Type D) and the lock nut, attach
the support bracket to the cabinet track hole. Use
the first track hole after the sill bracket on the
outer edge of the window sill. Tighten the
carriage bolt and the lock nut. Be sure the
cabinet slants outward.
4. Pull the bottom window sash down behind the
t op retainer bar until they meet.
Do not drill a hole in the bottom pan. The unit is
designed to operate with approximately 1/2" of
water in bottom pan.
upper guide
Type A
10
Carriage
Bolt
Cabinet
Track hole
Support
Bracket
Carriage bolt
and lock nut
Top
retainer
bar
Upper guide
Left Guide panel
Screws
(Type A)
Frame guide
Sill
Bracket
Right Guide Panel
Support
Bracket
Lock nut
Screw (Type B)
Sill bracket
Machine screw (Type D)
and lock nut
Outer edge
of window
sill
13