Klarstein 10032102 Manual De Instrucciones página 41

Removing / Attaching the bean container
• Grasp the bean container with two hands and turn the bean container clockwise.
• Once the bean container is unlocked, lift straight up off of the machine. The door on
the bottom of the bean container will keep any beans from falling out of the bottom
of the bean container.
• To remove and replace the upper burr.
• Place the bean container back onto the machine at a slight angle and match the
„Align" icon on the left of the machine to the „Align" icon on the left of the bean
container (Fig.7) and turn the bean container counterclockwise to lock back into
position.
Note: Follow cleaning instructions in chapter CARE AND CLEANING for bean
container and coffee chute maintenance. If the bean container is not locked back into
place when the BREW button is pressed, the machine will beep indicating there is an
error, correctly align and lock the bean container.
Removing / Replacing the upper burr
• Follow steps above in chapter 7.4 to remove the bean container.
• Turn the fineness knob clockwise towards RELEASE to unlock the upper burr.
• Pull the upper burr straight out using the small metal handle attached to the upper
burr (Fig. 8).
Note: Never try to remove the lower burr!
EN
41