Symbols; Safety Information - Amprobe ACD-22SW Manual De Uso

SYMBOLS


Battery
T
Double Insulated
B
Alternating Current
P
Complies with EU directives
Application around and
,
removal from hazardous live
conductors is permitted
Do not dispose of this product
=
as unsorted municipal waste

Safety Information

• The ACD-22SW and ACD-23SW True RMS swivel Clamp meters conform to
EN61010-1:2010; EN61010- 2-032:2012; EN61010- 2-033:2012; CAT III 600 V,
class II and pollution deg.2 and EN61326-1 (EMC Compliance)
CAT III: Is for measurements performed in the building installation.
• This instrument is EN61010-1 certified for Installation Category III (600V).
It is recommended for use in primary supply lines, overhead lines and
cable systems and distribution level and fixed installations, as well as lesser
installations.
• Do not exceed the maximum overload limits per function (see
specifications) nor the limits marked on the instrument itself. Never apply
more than 600Vdc / 600 V ac rms between the test lead and earth ground.
Warnings and Precautions
W
• Before and after hazardous voltage measurements, test the voltage
function on a known source such as line voltage to determine proper
meter functioning.
• Disconnect the test leads from the test points before changing meter
functions.
• Disconnected from the meter's test leads before measuring current.
• Inspect the Clamp meter, test leads and accessories before every use. Do
not use any damaged part.
• Never ground yourself when taking measurements. Do not touch exposed
circuit elements or test probe tips.
W
Refer to the manual
J
Earth Ground
F
Direct Current
R
Audible tone
Conform to relevant
;
Australian standards
Canadian Standards
)
Association (NRTL/C)
2