Metra 99-5849CH Instrucciones De Instalación página 3

6. For models with a 4.2-inch display
®
screen and SYNC : Remove (2) 9/32"
®
screws securing the SYNC module, then
unplug and remove. (Figure F)
7. Remove (4) 9/32" screws securing the
radio chassis, then unplug and remove.
(Figure G)
DASH DISASSEMBLY
(Figure F)
(Figure G)
8. For models equipped with a factory
backup camera: Remove (3) 10mm nuts
securing the camera module, move
the module down onto the lower stud,
then re-secure using just (1) 10mm nut.
(Figure H)
Continue to Kit Preparation
(Figure H)
REV. 9/27/2019 INST99-5849CH
3