Warranty Statement - wolfcraft 5018000 Traducción Del Manual De Instrucciones Original

• Mount the protective cover (22) with the two rubber washers (23) and the end cap (24) onto the
protection hood hoop (21). If it should not be possible to push the end cap on, use a hammer.
Then insert the protection hood hoop through the boreholes in the swivel arm and secure it with
the threaded screw (25).
• Mounting the angle grinder.
Align the angle grinder in the swivel arm between the two boreholes. Fix the angle grinder in position
with two matching threaded rods (26 or 27). Align the angle grinder with both of the adjusting screws
(7) perpendicular to the base plate. Tighten both of the hexagon nuts (28) over the threaded rods.
Then tighten the handle (29). Check the free running of the cutting disc in the cutting gap. Align
the swivel arm with the mounted angle grinder using the three fastening screws (3) if required.
• After completing the assembly, switch the angle grinder on for a few seconds and then switch
it off again. Re-check the tightness of all of the screws and the screwed connections.
• Your cutting stand is now ready for use.
Dear DIY enthusiast,
You have purchased a high-quality wolfcraft appliance which we know you will enjoy using.
wolfcraft appliances are built to high technical standards and undergo intensive development
and testing before leaving the factory. Constant checks and regular tests during their production ensure
a high standard of quality. Sound technical developments and reliable quality assurance give you the
certainty that you have made the right purchase decision. For this wolfcraft product we grant you
a 10 year guarantee from the date of purchase, provided the appliance is used exclusively
for DIY purposes.
This warranty only covers damage to the object of purchase itself and only such damage that
is attributable to material or manufacturing defects. This guarantee does not cover defects
or damage attributable to improper operation or inadequate maintenance of the appliance. Moreover,
the guarantee does not include the effects of normal wear, or defects or damage known to the customer
upon conclusion of the purchase contract. Guarantee claims can only be asserted upon submission
of the invoice/proof of purchase. The guarantee granted by wolfcraft does not restrict your legal rights
as a consumer (supplementary performance, rescission or reduction, compensation for damages
or expenses).
Warranty claims should be addressed to:
wolfcraft GmbH
Wolffstraße 1
56746 Kempenich
Germany
Declaration of Conformity pursuant to Directive 2006/42/EC
on Machinery, Annex II A
wolfcraft GmbH in D-56746 Kempenich, Wolff-Str. 1, hereby declares that this product (5018000)
conforms to Directive 2006/42/EC on Machinery.
Kempenich, 24.08.2017
Thomas Wolff
Person authorized to sign the Declaration of Conformity and to compile the technical documentation.
(Management; wolfcraft GmbH)
t

Warranty statement

10