Technical Specifications - FLORABEST FSG 85 B1 Traducción Del Manual De Instrucciones Original

GB MT
from the guarantee. Certain com-
ponents are subject to normal wear
and tear and are excluded from the
guarantee. These include in particular:
Grinding disks, carbon brushes, stop-
per, protective screen.
• Furthermore, the prerequisite for guar-
antee services is that the references
indicated in the operating instructions re-
garding cleaning and maintenance have
been adhered to.
• Damage, which has been caused
from material or manufacturing faults,
will be made good free of charge, by
replacement delivery or repair.
This requires that the appliance is
returned to our service center undis-
mantled and with proof of purchase and
guarantee.
• Repairs, which are not covered by the
guarantee, can be carried out for charge
by our service center. Our service center
will be glad to provide you with a cost
estimate.
We can only process devices which
have been packaged sufficiently and
which have been dispatched with cor-
rect stamping.
• Note: In case of complaint or service,
please deliver your device cleaned,
and with an indication of the defect, to
our service address.
Devices sent in freight collect - by
bulk freight, express or with other
special freight - are not accepted.
If you have a justified guarantee
claim, please contact our service
centre by telephone, which will then
advise you on how the claim will be
processed.
• Defective units returned to us will be
disposed of for free.
50

Technical specifications

Chain sharpener ................... FSG 85 B1
Nominal input voltage .............230V~, 50 Hz
Power consumption ....85 W (S2:15 min)**
Rated resting period ...................ca. 5 min
Safety class ........................................
Mechanical rating ............................. IP 20
Idle-running speed .....................5000 min
Disk speed ........................... max. 50 m/s*
Adjustment angle ................. 30° left / right
Grinding disk
dimensions ............................... Ø 104 mm
diameter of bore .............................22 mm
Weight ...........................................2.40 kg
Sound pressure level
(L ) ......................83 dB(A); K
pA
Sound power level (L
measured ............ 96 dB(A); K
guaranteed .............................. 99 dB(A)
Vibration (a
) .............3.05 m/s
n
*
The grinding disk must be able to withstand
a circulation speed of 50 m/s.
** Short-time duty: Do not run the unit for more
than 15 minutes at a time.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning:
The vibration emission value may
differ during actual use of the
power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at pro-
tecting the user should be based
=3 dB(A)
pA
)
wA
=3 dB(A)
wA
K=1.5 m/s
2,
II
-1
2