Assembling The Accessories; Glass Turntable; Grating; Electrical Connection - CASO DESIGN HCMG 25 Manual De Instrucciones

11.6 Assembling the accessories

 1 Hub (underside)
 2 Glass turntable
 3 Turntable drive
 4 Rolling ring
Assemble the glass turntable as follows:
 Insert the rolling ring
 Place the glass turntable inside the appliance so that the grooves on the underside of
the glass dish lock into the turntable drive.
 Never place the glass tray inside the appliance upside down; it must be able to revolve
freely.
 When cooking always use the glass turntable and the matching rolling ring.
 Always place all food and containers on the glass turntable or the grating for grilling.
 In case the glass turntable or the rolling ring crack or break please contact your Service
Centre.
11.6.2
 Place the grating on the glass turntable.
► Use the grating only for grilling, convection and combination operation C3.

11.7 Electrical connection

DANGER
► Risk of electrocution
► Touching internal compponents may cause serious, severe and fatal injuries.
► Do not disassemble the appliance.
► Improper grounding can cause electrical shocks. Do not use a power outlet if it is not
properly installed and grounded.
In order to ensure the safe and trouble-free operation of the device, the following
instructions must be observed for the electrical connection:
 Before connecting the device, compare the connection data (voltage and frequency) on
the rating plate with those of your electrical network. This data must agree in order that
no damages occur in the device. If in doubt, ask your qualified electrician.
caso HCMG 25
11.6.1

Glass turntable

Grating

59