Still Mode; Selecting Audio Channels - Sylvania 6626LCT A Manual Del Usuario

STILL MODE

You can freeze the image shown on the screen.
1 2
4 5
7 8
- 0
SETUP
1
Pause the image.
• When you press [STILL], the image shown on
the screen is paused.
Still
• The audio is not paused and keeps on reading
out.
• If the digital signal is gone or protected, the
image will remain paused and the audio will be
muted.
• The Still function will be released after 5
minutes.
2
Canceling Still function.
• The Still function will be canceled by pressing
any button while Still function is working.
NOTE:
• Press any key except [POWER] to cancel still mode.

SELECTING AUDIO CHANNELS

This section describes how to switch the audio in
the analog mode and how to switch the audio lan-
guage in the digital mode.
7 8
- 0
SETUP
TV
When you press [AUDIO], the currently selected
audio mode will be displyed on the screen.
SAP /
3
6
AUDIO
9
STILL STILL
SCREEN
MODE
AUDIO AUDIO
9
STILL
SCREEN
MODE
6
STEREO
Press [AUDIO] to cycle through available audio
channels.
When the broadcasting has all audio...
SAP / STEREO
SAP / STEREO
When the broadcasting has stereo audio and
monaural audio...
MONO / STEREO
When the broadcasting has SAP and monaural
audio...
SAP / MONO
When the broadcasting is having only monaural
audio...
MONO
(cannot be switched.)
STEREO : Outputs stereo-audio
SAP : Outputs second audio program
MONO : Outputs mono-audio
DTV
When you press [AUDIO], the currently selected
language and the number of available languages
will be displayed on the screen.
English 1/3
Press [AUDIO] to cycle through available audio
languages.
English 1/3
Other 3/3
• Available languages differ depending on the
broadcast.
• The information display will automatically dis-
appear in one minute.
NOTE:
• Pressing [AUDIO] does not control external audio source.
SAP / MONO
MONO / STEREO
SAP / MONO
6-1
Spanish 2/3
19
EN