Elements Of The Complete Installation - Erreka LINCE Guía Rápida De Instalación Y Programación

LINCE
Quick installation and programming guide
This quick guide is a summary of the complete installation manual. The manual contains safety warnings
IMPORTANT and other explanations which must be taken into account. The installation manual can be downloaded by
NOTE going to the "Downloads" section at the Erreka website:
http://www.erreka-automation.com
Electrical cabling
A: Main power supply
B: Flashing light
C: Photocells (Tx / Rx)
D: Pushbutton/wall key
E: Antenna
Assembly levels
Unlocking
Unlocking for manual operation:
• Insert the key (1) and turn clockwise 90º, without
forcing it: the cylinder will protrude a few millimetres.
• Turn the key anti-clockwise 90º and remove.
• Turn the handle (2) clockwise 270°, through to the
stopper.
O
BEWARE: the base plate is not
symmetric (a > b)
C71A
Unlocking
D71A
• Turn the handle (2) anti-clockwise 270°, through to
• Push the cylinder (3) inward and manually move the
• Activate a key device in order for the gate to carry out

Elements of the complete installation

Locking
Motorised operation locking:
the stopper.
gate to interlock it in the drive mechanism.
a "reset".
English
E71A
D71B
9