Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
•
Keep all movement on the slopes slow and gradual. Do not make sudden
changes in speed or direction. Rapid engagement or braking could cause
the front of the machine to lift and rapidly flip over backwards which could
cause serious injury.
•
Avoid starting or stopping on a slope. If tires lose traction, disengage the
blade(s) and proceed slowly straight down the slope.
Do Not:
•
Do not turn on slopes unless necessary; then, turn slowly and gradually
downhill, if possible.
•
Do not mow near drop-offs, ditches or embankments. The mower could
suddenly turn over if a wheel is over the edge of a cliff, ditch, or if an edge
caves in.
•
Do not try to stabilize the machine by putting your foot on the ground.
•
Do not use a grass catcher on steep slopes.
•
Do not mow on wet grass. Reduced traction could cause sliding.
SAFETY SYMBOLS
This page depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before
attempting to assemble and operate.
Symbol
WARNING:
the warnings and instructions in this manual and on the machine.
SAFETY INSTRUCTIONS
READ THE OPERATOR'S MANUAL(S)
Read, understand, and follow all instructions in the manual(s) before attempting to assemble and
operate
STOP
Turn off the engine before opening the bagger cover.
Your Responsibility—Restrict the use of this power machine to persons who read, understand and follow
GENERAL SERVICE
•
Before cleaning, repairing, or inspecting, make certain the blade(s) and all
moving parts have stopped. Disconnect the spark plug wire and ground
against the engine to prevent unintended starting.
•
Keep all nuts, bolts, and screws tight to be sure the equipment is in safe working
condition.
•
Never tamper with your mower's safety interlock system or other safety devices.
Check their proper operation regularly.
•
Never attempt to make adjustments or repairs while the mower's engine is running.
•
Grass catcher components and the discharge cover are subject to wear and damage
which could expose moving parts or allow objects to be thrown. For safety
protection, frequently check components and replace immediately with original
equipment manufacturer's (O.E.M.) parts only, listed in this manual. Use of parts
which do not meet the original equipment specifications may lead to improper
performance and compromise safety!
•
Maintain or replace safety and instruction labels, as necessary.
Description
SAVE THESE INSTRUCTIONS!
4
Publicidad
Tabla de contenido
