Hot Water Delivery; Steam Delivery; Switching Off; Maintenance - Bezzera HOBBY Manual De Instrucciones

MOD. BEZZERA HOBBY
using the supplied press (19).
3) Reattach the filter-holder to the filter-holder
unit (7).
4) Place a cup under the machine filter holder
(13).
5) Press the coffee switch (4) until the desired
amount of coffee is made.
6) Press the coffee switch again (4) to stop mak-
ing coffee.

5.4 Hot water delivery

1) Wait until the green light (3) turns on indicat-
ing that the machine has reached ideal hot
water making temperature.
2) Place a container under the steam/water
distribution nozzle (6)
3) Open the water/steam faucet by rotating the
knob (5) counter-clockwise and press the
coffee switch (4).
4) After dispensing the desired amount of wa-
ter, rotate the water/steam faucet knob (5)
clockwise and press the coffee switch again
(4) to stop distribution.

5.5 Steam delivery

Proceed as follows to distribute steam:
1) Select position 2 on the steam switch (2) and
open the water/steam faucet by rotating the
knob (5 – Fig. 07) counter-clockwise until
steam flows from the water/steam distribution
nozzle (6 Fig. 07).
2) Close the water/steam faucet by rotating the
knob (5) clockwise and wait until the green
light turns on (3) to indicate that the tempera-
ture has been reached for steam distribution.
3) Submerge the water/steam distribution noz-
zle (6) in the drink to be heated and open the
water/ steam faucet by rotating the knob (5)
counter-cloockwise.
4) Heat the drink as desired, discharge some
steam to clean the nozzle.
5) Close the water/steam faucet by rotating the
knob (5) clockwise and turn the steam switch
(2) to 1 to stop steam production.
After producing stem, fill the boiler as
follows:
1) Make sure the steam switch (2) is in Position
1.
2) Place a container under the steam/water distri-
bution nozzle (6)
3) Open the steam/water faucet by rotating the
knob (5) counter-clockwise.
4) Press the coffee switch (4) until water continu-
ally flows from the water/steam distribution
nozzle (6).
5) Press the coffee switch (4) and close the water/
steam faucet by rotating the knob (5) clock-
wise.
The machine is ready for normal use.
The manufacturer is not liable
for damages to the electrical
resistance due to failure to fill
the boiler.

5.6 Switching off

Press the main switch (1) (yellow switch light off).
If the machine is left off for a prolonged period
of time:
1) Empty the tank
2) Disconnect the plug from the electrical sock-
et.
3) Place the machine in a safe, dry and exclu-
sively accessible place.

6 - MAINTENANCE

To allow the machine to work correctly, follow the
maintenance instructions provided below.

6.1 Safety rules

Do not subject the machine to water jets.
Disconnect the machine from the electrical
power by turning the electrical power
network omnipolar knife-switch lever to the
resting position 0. Remove the plug and close the
water interception tap before carrying out maintenance
and/or cleaning work. If the machine is malfunctioning,
do not attempt to repair it alone and call the technical
assistance service immediately. If the electrical power
cable has been damaged, turn off the machine
immediately, turn off the water and call the technical
assistance service. Do not replace it alone. Carry out
24