Saving Energy; Using The Device In Dc Mode; Using The Device In Ac Mode - Dometic RF Serie Instrucciones De Uso

Operation
7.1

Saving energy

• Only open the refrigerator as often and for as long as necessary.
• Allow warm food to cool down first before placing it in the device to keep cool.
• Defrost your refrigerator as soon as a layer of ice forms.
• Avoid unnecessarily low temperature settings.
• For optimal energy consumption, position the shelves and drawers according to
their position on delivery.
• On a regularly basis, make sure the door seal still fits properly.
• Clean dust and dirt from the condenser at regular intervals.
7.2

Using the device in DC mode

I
NOTE
• When the device is connected to the DC power socket the cooling
level cannot be adjusted.
• Cool the device for about 24 hours before starting your journey
using gas or electricity from the mains. This way your device will
attain the required cooling level faster when you reach your
destination.
Turning on the device (fig. 2, page 3)
➤ Turn the energy selector switch (1) to the
✔ The device starts cooling the interior.
Turning off the device
➤ Turn the energy selector switch (1) to the  position.
✔ The device is switched off.
7.3

Using the device in AC mode

Turning on the device (fig. 2, page 3)
1. Turn the energy selector switch (1) to the
2. Turn the thermostat (3) to the MAX position.
✔ The device starts cooling the interior.
24
position.
position.
RF60, RF62
EN