Safety Information - brondell Halo PH10-B Manual Del Proprietário

SAFETY INFORMATION

(IMPORTANT SAFEGUARDS)
Be careful to keep this safety information. Please read this information
to prevent property loss and ensure safety.
DANGER: If not observed, serious injury or even death may occur as a result.
• Read all instructions before using this appliance.
• Ensure that the voltage indicated on the appliance corresponds with the voltage of
your electrical outlet.
• Do not use the appliance near gas appliances, heating devices, fireplaces, lighting
devices or direct sunlight.
• If the power cord is damaged, do not attempt to repair, modify, or replace the cord
yourself. Call the Brondell Service Center at 888-542-3355.
• Do not expose the appliance to water or handle the power plug with wet hands.
• Do not clean or spray the appliance with water, liquid, detergent or any flammable
materials such as insecticides or fragrances to avoid electric shock or fire hazard.
• Do not obstruct the air inlet and/or outlet.
• An extension cord may be used, so long as the cord accepts a polarized plug, is
rated for a current greater than or equal to 120V, and has been approved by a
competent authority.
• Do not use the appliance when it is damaged or performs abnormally.
• Do not use the appliance when indoor smoke-type insect repellents are used or in
places with oily residues, burning incense or chemical fumes.
• Do not use the appliance in a location with major temperature change to avoid
condensation inside the appliance.
Do not use the appliance in humid or high temperature environment such as
•
bathroom
or kitchen.
If the appliance produces a strange noise, burning smell or smoke, unplug the
•
power plug from the electrical outlet and call the Brondell Service Center.
• Do not use the appliance for anything other than its intended use.
• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT USE THIS PRODUCT
WITH ANY SOLID-STATE SPEED CONTROL DEVICE (for example, a Dimmer Switch).
• This appliance has a polarized plug (one blade is wider than the other). To reduce
the risk of electric shock, this plug is intended to fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Do not attempt to defeat this safety feature.
SAVE THESE INSTRUCTIONS
2