Product Operation; Selecting The Operating Mode - brondell Halo PH10-B Manual Del Proprietário

PRODUCT OPERATION

TURNING THE HALO ON/OFF
Place the Halo on a flat, solid surface. Do not block the Air Outlet with objects,
and remove any heat sources and/or open flames near the unit.
1. Plug the Halo into the nearest power outlet that accepts
a polarized (grounded) plug. An extension cord may be
used, so long as the cord accepts a polarized (grounded)
plug and is rated for a current of 120V. The unit will chime
to indicate that power is running to the unit, but it will not
power on automatically.
2. Press the Power button at the top of the Control Panel.
The Halo will chime, the fan will come on, and the Air
Quality Indicator will show Blue. If the unit does not power
on, please see our Troubleshooting section on page 16.
3. To turn the unit off, press and hold the Power button for a
minimum of 2 seconds. The unit will chime and power off.

SELECTING THE OPERATING MODE

1. Press the Mode Indicator Button to toggle between Auto
Mode and one of the three Manual fan speed selections.
NOTE: The Halo will remember the last mode setting
when the unit is turned off and turned back on
again. The same is true if the unit is unplugged
and plugged back in.
8