mechanical failure.
- Individuals who operate or work
on the refrigerant circuit must
have the appropriate certifica-
tion issued by an accredited
organization that ensures com-
petence in handling refrigerants
according to a specific evalua-
tion recognized by associations
in the industry.
- Repairs must be performed
based on the recommendation
from the manufacturing com-
pany. Maintenance and repairs
that require the assistance of
other qualified personnel must
be performed under the super-
vision of an individual specified
in the use of flammable refrig-
erants.
SAFETY ADVICE AND WARN-
INGS
- This appliance may be used
by children aged 8 years and
over and persons with reduced
physical, sensory or mental ca-
pabilities or lack of experience
and knowledge, if they have
been given appropriate supervi-
sion or training in the use of the
appliance in a safe and Under-
stand the dangers involved.
- This appliance is not a toy.
Children should be supervised
to ensure that they do not play
with the appliance.
- Do not allow children to perform
cleaning and maintenance with-
out supervision.
- Install the appliance in ac-
cordance with national wiring
regulations.
- Leave a space of 30cm be-
tween walls or other obstacles
and the appliance. Do not cover
or obstruct the sides of the ap-
pliance, leaving at least 30 cm
space around the appliance.
- The product requires adequate
ventilation in order to function
properly.
- The fuse used in the appliance
is type: AC2A, electrical charac-
teristics: 250V.
- If the mains connection is dam-
aged, it must be replaced. Take
the appliance to an authorized
service center. Do not attempt
to disassemble or repair it your-
self as it may be dangerous.
- Before connecting the appliance, check that the
voltage indicated on the nameplate matches
the voltage on the rating plate.
- Connect the appliance to a power socket that
supports at least 16 amps.
- The appliance plug must match the electrical
socket of the socket. Never modify the plug. Do
not use plug adapters.
- Do not force the connecting cable. Never
use the power cord to lift, carry or unplug the
appliance.
- Do not wrap the power cord around the appli-
ance.
- Check that the power cord is not pinched or
bent.
- Do not allow the connecting cord to hang or
touch the hot surfaces of the appliance.