Installation Of The Setting-Up Kit - Graf KLARO Easy Instrucciones Para El Montaje

5. Installation of the setting-up kit

5.1 Assembling the disc aerators
The stainless steel pipes for aeration are to
be assembled in the tank according to their
installation size in line with the drawings
below.
All connections are to be sealed using Tef-
lon tape. Finally, the concrete weight sup-
plied is to be placed on to the downpipe.
300
Assembly of the 2nd disc aerator
5.2 Assembly of the pipe aerators
The stainless steel feet are bolted to the stainless steel air distributor.
The diaphragm pipe aerators and the downpipe are installed later in the tank.
5. Installation of the setting-up kit
Downpipe
300
46 / 144
Seal all threads with
Teflon tape!
Assembly of the disc aerators (1st disc aerator)
500
Assembly of the 3rd disc aerator
Diaphragm plate
Tighten plastic
thread by hand
500