Dri-Eaz LGR 7000XLi El Manual Del Propietario

LGR 7000XLi Portable Dehumidifier
The Dri-Eaz® LGR 7000XLi dehumidifier reduces humidity in enclosed environments by
removing water vapor from the air. The 7000XLi is rugged, durable and highly portable, making
it ideal for water damage restoration, structural drying, construction, and other applications
requiring temporary, high-performance dehumidification.
WARNING
ADVERTENCI
WARNING! Do not alter or modify your unit in any
way. Use only replacement parts authorized by Dri-
Eaz. Modifications or use of unapproved parts could
create a hazard and will void your warranty. Contact
your local distributor for assistance.
WARNING! Electric shock hazard, rotating fan, hot
surface hazards. Unplug unit before opening cover
for cleaning or servicing. Unit must be grounded.
CORRECT PLUG REMOVAL
Grasp IEC plug and pull straight out
IMPORTANT: Damage to IEC receptacle or
dehumidifier resulting from improper removal
of the power cord is not covered by warranty.
The IEC power cord is a wear item and is not
covered by warranty.
07-01776N F412
Owner's Manual
DRI-EAZ PRODUCTS, INC.
15180 Josh Wilson Road, Burlington, WA 98233
Phone: 800-932-3030 Fax: 360-757-7950 LegendBrandsRestoration.com
Patents: http://www.LBpatents.com
S A V E T H E S E I N S T R U C T I O N S
Model F412
• Inspect the power cord before use. If cord is
damaged, do not use. Always grasp the plug (not
the cord) to unplug.
• Insert three-prong plug on power cord into a
matching electrically grounded outlet. Do not use
adapter. Never cut off third prong. Do not use an
extension cord.
• The unit must be operated on a 120V/60Hz circuit
protected by a Ground Fault Circuit Interrupter
(GFCI) device.
• Keep motor and wiring dry.
• Do not attempt to repair the unit. For Authorized
Service Centers, contact Dri-Eaz.
INTRODUCTION
LGR (low-grain refrigerant) dehumidifiers utilize an
internal pre-cooling system to boost water removal
efficiency. LGR units can continue to remove moisture in
drier environments where conventional refrigerants
cannot.
OPERATING YOUR DEHUMIDIFIER
Set unit upright
NOTICE: Transporting or storing the unit in a
horizontal position is not recommended. When the
machine is placed in a horizontal position, the oil
from the compressor can flow into the refrigerant
coils and reduce the ability of the dehumidifier to
function and possibly damage the unit. If the unit
has been placed in a horizontal position, set it
upright and let it stand for at least 30 minutes before
turning it on.
Positioning a Dehumidifier
For best results, operate your dehumidifiers in an
enclosed area. Close all doors and windows that
open to the outside to maximize the unit's water
removal efficiency. Place your dehumidifier away
from obstructions, and keep it away from anything
1 Legend Brands