Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

6
Phone: +1 855-757-7776
®
The Dri-Eaz
BD2500 LGR Dehumidifier reduces humidity in enclosed environments by removing water
vapor from the air. The BD2500 is ideal for water damage restoration, structural drying, construction, and
many other applications requiring temporary, high-performance dehumidification.
WARNING
Read and understand manual before operating.
WARNING! Do not alter or modify your BD2500 in
any way. Use only replacement parts authorized by
Dri-Eaz Products, Inc. Modifications or use of unap-
proved parts could create a hazard and will void
your warranty. Contact your authorized Dri-Eaz dis-
tributor for assistance.
WARNING! Electric shock hazard, rotating fan, hot
surface hazards. Unplug unit before opening cover
for cleaning or servicing.
WARNING! Unit must be grounded.
• Keep motor and wiring dry. Keep out of standing wa-
ter and do not install in area likely to be subject to
water intrusion. Do not expose to rain, water or
snow.
• Insert plug on power cord into a matching outlet.
• Do not use an extension cord.
• To reduce the risk of fire or electric shock, do not
use this unit with any solid-state speed control de-
vice.
FIRE HAZARD
• Keep away from open flames and heat sources.
• Do not use or store where vapors from gasoline, sol-
vents, thinners or other flammable materials may be
present.
WARNING! Unplug unit before cleaning or servicing.
• Turn off unit and unplug before lifting or moving.
07-01900C F413-230V AU 2014-03
Warranty 07-01921 DoC 07-00289
Owner's Manual
BD2500 LGR Dehumidifier
DRI-EAZ PRODUCTS, INC.
15180 Josh Wilson Road, Burlington, WA 98233, USA
Fax: +1 360 757 7950 international.legendbrands.net
Patents: http://www.LBpatents.com
O R I G I N A L I N S T R U C T I O N S
F413-230V
• Handle the unit carefully. Always operate the unit on
a stable, level surface. Do not drop, throw, or place
where it could fall. Rough treatment can damage the
unit, and may create a hazardous condition or void
the warranty.
• When practical, use two people to lift and carry the
unit
• Inspect the power cord before use. If cord is dam-
aged, do not use. Always grasp the plug (not the
cord) to unplug.
• The unit must be operated on a 230V/50 Hz circuit
protected by a Ground Fault Circuit Interrupter
(GFCI) device.
• The plug must be accessible when the dehumidifier
is installed and in use.
• Unit not intended for access to general public.
INTRODUCTION
The BD2500 Dehumidifier reduces humidity in enclosed
structural environments by removing water vapor from
the air. With proper use, the BD2500 can help to dry out
damp structural materials, insulation, and contents, and
maintain a healthy level of humidity. Using the BD2500
may also prevent secondary damage caused by high
humidity.
How the BD2500 works
The BD2500 refrigerant dehumidifier uses a fan to draw
moist air in and condenses it into water that collects in a
tray and is automatically pumped out through a drain
hose. The unit can be set to operate continuously or the
user may select Humidistat Mode. In Humidistat Mode,
the BD2500 will turn on and off automatically to maintain
the inlet humidity level the user has selected.
Features
• Automatic humidistat to set and maintain desired
humidity level.
1
Dri-Eaz Products, Ltd.

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Dri-Eaz BD2500 LGR

  • Página 1 Fax: +1 360 757 7950 international.legendbrands.net ® The Dri-Eaz BD2500 LGR Dehumidifier reduces humidity in enclosed environments by removing water vapor from the air. The BD2500 is ideal for water damage restoration, structural drying, construction, and many other applications requiring temporary, high-performance dehumidification.
  • Página 2 For more information about creating an opti- mum drying environment, contact your local distributor or call Dri-Eaz at +1 855-757-7776 Turn the unit on Set up drain hose The control panel on the BD2500 dehumidifier has a display and a touchpad with four keys.
  • Página 3: Control Panel Guide

    60 seconds to 0. This de- lay allows time for refrigerant pressures to equalize for easier starting. Once the unit completes the compressor delay, the display shows UNIT ON XX HRS and cycles 07-01900C F413-230V AU 2014-03 Warranty 07-01921 DoC 07-00289 Dri-Eaz Products, Ltd.
  • Página 4: Transportation And Storage

    Use of respirator mask and gloves is recommended. If horizontally on a flat surface. unit has been exposed to potentially dangerous contam- inants, clean thoroughly and sanitize before reuse. 07-01900C F413-230V AU 2014-03 Warranty 07-01921 DoC 07-00289 Dri-Eaz Products, Ltd.
  • Página 5: Before Each Use

    Do not operate without the HAF filter in place. Do not operate the unit with any other filter type. Incorrect filtration will reduce unit efficiency and can cause damage to the unit. 07-01900C F413-230V AU 2014-03 Warranty 07-01921 DoC 07-00289 Dri-Eaz Products, Ltd.
  • Página 6: System Messages

    If this still does not fix the problem, contact your local authorized service center or call the Dri-Eaz Service Department at +1 855-757-7776. NOTE: The message “POWER FAILURE” is not a system error. When this message is displayed, it indicates that power to unit was interrupted and then restored.
  • Página 7: Troubleshooting

    Water removal 38 L/day at 26.7°C/60% RH FOR PARTS AND SERVICE CALL YOUR LOCAL Operating temperature range 1–38°C DISTRIBUTOR or Dri-Eaz at +1 855-757-7776 – interna- Sound level Does not exceed 70 dB tional.legendbrands.net Safety Visit warranty.DriEaz.com and register your purchase to ensure you receive any important product releases.
  • Página 8: Instrucciones Originales

    BD2500 LGR reduce la humedad en ambientes cerrados al eliminar el vapor de agua del aire. El BD2500 LGR es ideal para la restauración de daños ocasionados por el agua, el seca- do estructural, la construcción y muchas otras aplicaciones que requieren deshumidificación temporal de alto rendimiento.
  • Página 9 Cuando la unidad se conecta por primera vez en la ali- acerca de cómo crear un ambiente de secado óptimo, mentación de corriente alterna (CA), la pantalla del pa- comuníquese con Dri-Eaz al +1 855-757-7776 nel de control mostrará brevemente una serie de lectu- ras en ciclo.
  • Página 10: Guía Del Panel De Control

    Cuando llegue al parámetro que quiera ajus- te cada 20 minutos, o cada vez que el depósito esté lle- tar, presione MENU SELECTION (SELECCIÓN DE MENÚS) para aumentar el valor. Presione DISPLAY 07-01900C F413-230V AU 2014-03 Warranty 07-01921 DoC 07-00289 Dri-Eaz Products, Ltd.
  • Página 11: Al Final De La Operación

    El panel de control mostrará te). Presione MENU SELECTION (SELECCIÓN DE uno de los siguientes mensajes: MENÚS) para alternar entre ON (ENCENDIDO) y OFF (APAGADO). NOTA: En el modo de humidistato, la uni- 07-01900C F413-230V AU 2014-03 Warranty 07-01921 DoC 07-00289 Dri-Eaz Products, Ltd.
  • Página 12: Transporte Y Almacenamiento

    TRICA. Desconecte la unidad antes de limpiarla o cual reduce el rendimiento y ocasiona que la unidad se darle mantenimiento. sobrecaliente. Utilice una aspiradora con un cepillo y un 07-01900C F413-230V AU 2014-03 Warranty 07-01921 DoC 07-00289 Dri-Eaz Products, Ltd.
  • Página 13: Según Se Requiera

    Limpie las bobinas. Con la cubierta retirada, inspec- cione las dos bobinas. Si hay polvo y suciedad, limpie a fondo con una aspiradora o limpie con limpiador para bobinas. 07-01900C F413-230V AU 2014-03 Warranty 07-01921 DoC 07-00289 Dri-Eaz Products, Ltd.
  • Página 14: Mensajes Del Sistema

    Si esto no soluciona el problema, comuníquese a su centro de servicio autorizado o llame al Departamento de Servicio de Dri-Eaz al +1 855-757-7776. NOTA: El mensaje “POWER FAILURE” (FALLA EN LA ENERGÍA) no es un error del sistema. Cuando aparezca este mensaje, significa que se interrumpió...
  • Página 15: Solución De Problemas

    Si el problema que experimenta no está en esta lista, llame a su distribuidor local a la línea sin costo de nuestro departamento de servicio al +1 855-757-7776 para obtener más ayuda. ESPECIFICACIONES PIEZAS INCLUIDAS Deshumidificador BD2500 LGR Manguera de desagüe de 12 m con conexión de aco- Nombre Modelo F413-230V plamiento rápido...
  • Página 16 ® Le déshumidificateur Dri-Eaz BD2500 LGR réduit l'humidité dans des environnements clos en éliminant la vapeur d'eau de l'air. Le déshumidificateur Révolution est idéal pour la restauration des dommages causés par l'eau, le séchage de la structure, la construction, et de nombreuses autres applications nécessitant une déshumidification temporaire, de haute...
  • Página 17 Pour plus d'informations sur la vention de l'utilisateur n'est requise. création d'un environnement de séchage optimal, contacter votre distributeur local ou Dri-Eaz au +1 855- 757-776. Allumer l'appareil Mettre en place le tuyau de vidange Le panneau de commande sur le déshumidificateur...
  • Página 18: Guide Du Panneau De Commande

    Guide Panneau de commande, ci-dessous. réglage et redémarrer le cycle d'affichage. Si aucune touche n'est sélectionnée pendant 5 minutes, l'écran se réinitialise automatiquement et retourne au mode d'affichage normal. 07-01900C F413-230V AU 2014-03 Warranty 07-01921 DoC 07-00289 Dri-Eaz Products, Ltd.
  • Página 19: A La Fin Du Travail

    Affiche l’échelle de température actuelle. Appuyer sur UNIT ON 00 HRS MENU SELECTION pour sélectionner Fahrenheit ou INLET XX° C Celsius. Attendre jusqu'à ce que l’écran affiche l'affichage normal avant de procéder. 07-01900C F413-230V AU 2014-03 Warranty 07-01921 DoC 07-00289 Dri-Eaz Products, Ltd.
  • Página 20: Transport Et Stockage

    Retirer les grilles et le couvercle comme 07-01900C F413-230V AU 2014-03 Warranty 07-01921 DoC 07-00289 Dri-Eaz Products, Ltd.
  • Página 21 Ne pas faire fonctionner l’appareil sans le filtre HAF en place. Ne pas utiliser l'appareil avec n'importe quel autre type de filtre. Une filtration inadéquate réduira l'efficacité de l'appareil et peut causer des dommages à l'appareil. 07-01900C F413-230V AU 2014-03 Warranty 07-01921 DoC 07-00289 Dri-Eaz Products, Ltd.
  • Página 22 Cette opération généralement a pour but de réinitialiser l'électronique, et l'appareil commencera à fonctionner normalement. Si l’erreur persiste, consulter le tableau d’explication des erreurs et la solution ci-dessous. Si vous n’avez pas réussi à résoudre le problème, contactez votre centre de service agréé ou appeler le service Dri-Eaz au +1 855-757-7776.
  • Página 23: Depannage

    Norme de sécurité POUR DES PIECES DE RECHANGE ET SERVICE Ces spécifications sont sujettes à modification sans préavis. appeler votre distributeur local ou Dri-Eaz au +1 855- Certaines valeurs peuvent être approximatives 757-7776. international.legendbrands.net. Visiter waranty.DriEaz.com et enregistrer votre achat afin de vous assurer de recevoir tous les communiqués...

Tabla de contenido