Installing Windows - ASROCK A55iCafe Manual De Instrucciones

Tabla de contenido

Publicidad

2.10 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive first. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom side
to install those required drivers. Therefore, the drivers you install can work properly.

2.11 Installing Windows

XP 64-bit With RAID Functions
If you want to install Windows
on your SATA / SATAII HDDs with RAID functions, please refer to the document at
the following path in the Support CD for detailed procedures:
..\ RAID Installation Guide
2.12 Installing Windows
XP 64-bit Without RAID Functions
If you want to install Windows
bit OS on your SATA / SATAII HDDs without RAID functions, please follow below
procedures according to the OS you install.
2.12.1 Installing Windows
If you want to install Windows
RAID functions, please follow below steps.
Using SATA / SATAII HDDs without NCQ and Hot Plug functions (IDE mode)
STEP 1: Set up UEFI.
A.
Enter UEFI SETUP UTILITY
Configuration.
B.
Set the "SATA Mode" option to [IDE].
STEP 2: Install Windows
®
7 / 7 64-bit / Vista
®
7 / 7 64-bit / Vista
®
7 / 7 64-bit / Vista
®
7 / 7 64-bit / Vista
®
XP / XP 64-bit Without RAID Functions
®
XP / XP 64-bit on your SATA / SATAII HDDs without
Advanced screen
®
XP / XP 64-bit OS on your system.
ASRock A55iCafe Motherboard
TM
TM
/ Vista
64-bit / XP /
TM
TM
/ Vista
64-bit / XP / XP 64-bit
TM
TM
/ Vista
64-bit / XP /
TM
TM
/ Vista
64-bit / XP / XP 64-
Storage
27

Publicidad

Tabla de contenido
loading

Tabla de contenido