Carrying In The Outdoor Unit - Toshiba MMY-MAP0804HT5P Manual De Instalación

5

Carrying in the outdoor unit

CAUTION
Handle the outdoor unit carefully, observing the following items.
When using a forklift or other machinery for loading/unloading in transportation, insert the prongs of the forklift
into the rectangular holes for handling as shown below.
When lifting up the unit, insert a rope able to bear the unit's weight into the rectangular holes for handling, and
tie the unit from 4 sides.
(Apply padding in positions where the rope comes into contact with the outdoor unit so that no damage is caused
to the outer surface of the outdoor unit.)
(There are reinforcing plates on the side surfaces, so the rope cannot be passed through.)
Rectangular
Side
holes for
handling
NO GOOD
Front /Back
GOOD
Prongs of the
forklift
13-EN
1114208701-1 EN PT ES.indb 7 1114208701-1 EN PT ES.indb 7
GOOD NO GOOD NO GOOD
Plaster
Rope
Plaster
Rectangular Reinforcing
holes for plate
lifting
– 7 –
Weight centre and weight
Weight centre of an outdoor unit
(A)
Anchor bolt position
700
X
No. Model type
MAP080
(A) MAP100
MAP120
MAP140
(B)
MAP160
(B)
Anchor bolt position
920
X
X (mm) Y (mm) Z (mm) Weight (kg)
500 390 645 242
605 350 700 329
14-EN
02/27/14 1:39 PM 02/27/14 1:39 PM