Erreka CICLON CLS210F Guía Rápida De Instalación Y Programación página 6

Unlocked for manual operation:
• Remove the cap and insert the key (1).
• Turn the key 90° anti-clockwise (A). The gate is
free to move manually.
Assembly with sliding arm ACL16/
N32501 (inward opening)
The TC closing limit switch must be
installed with this type of arm.

The levels with no brackets
correspond to models CLS210F/
CL210F (T2000VFI)/ CL210 with arm
N32501.

The levels between
correspond to models CLS250F/
CL250F/ CL250 with arm ACL16.
500mm
(1000mm)
610mm
(990mm)
ACL16/ N32501
6
Unlocked (only for models with brake)
D246A
Assembly with sliding arm
N32901 (outward opening)
The TC closing limit switch must be
installed with this type of arm.

The exterior opening arm is only
valid for the operators CLS210F/
CL210F (T2000VFI)/ CL210.
brackets
100mm
(80mm)
548mm
(600mm)
120 mm
M246A
Lock for motorised operation:
• Turn the key (1) 90° clockwise (B).
• Remove the key and position the cap to stop
water from coming in.
Assembly levels
100mm
548mm
500mm
580mm
100mm
360mm
N32901
Assembly with articulated arm
N32001 (inward opening)
TC closing limit switch and TA
opening limit switch must be installed
with this type of arm.

The N32001 articulated arm is
only valid for the models CLS210F/
CL210F (T2000VFI)/ CL210.
340mm
M246C
D246B
548mm
410mm
435 mm
N32001
M246B