Connect The Adapter - Linksys WUSB54GR Guía De Instalación Rápida

2

Connect the Adapter

Now that the Setup Wizard has
prompted you to connect the
Adapter, follow the instructions
below.
A
Connect one end of the
included USB cable to the
Adapter's USB port
B
Connect the other end of the
cable to one of the USB ports
on your computer.
C
The Power LED should light up
when the Adapter is plugged
in.
D
Raise the antenna. Make sure
the antenna points straight up
into the air, at a 90º angle from
the Adapter. This will ensure
optimum wireless operating
range and performance.
E
Once the Adapter is
connected, click Next on the
Connecting the Adapter
screen to proceed.
F
Windows 98SE and ME users will
need to restart their PCs.
Proceed to Step 3.
Connecting the
Adapter
3