Connect The Dual-Band Wireless A+Gpci Adapter - Linksys WMP55AG Guía De Instalación Rápida

Connect the Dual-Band Wireless A+G
2
PCI Adapter
A
Turn off your desktop PC.
B
Open your PC's case, and locate
an available PCI slot on the
motherboard.
C
Slide the Adapter into the PCI slot.
Make sure that all of its pins are
touching the slot's contacts.
D
After the Adapter is set firmly in
place, secure its fastening tab to
your PC's chassis with a mounting
screw. Then close your PC's case.
E
Rotate the antenna so that it is
positioned straight up and
perpendicular to the horizon.
F
Power on your desktop PC.
G
Windows will detect the new
hardware and begin installing the
driver files in your operating
system.
H
After the Adapter is installed, the
Wireless Network Monitor icon will
appear in the system tray at the
bottom right-hand corner of your
screen.
Double-click the icon if you want
to check the link information,
search for available wireless
networks, or make additional
configuration changes.
Congratulations! The installation of the
Dual-Band Wireless A+G PCI Adapter is
complete.
8
C
H
For additional information or troubleshooting
help, refer to the User Guide on the CD-ROM
or the Technical Support Insert. You can also
e-mail for further support.
Website
http://www.linksys.com/international
Linksys is a registered trademark or trademark of
Cisco Systems, Inc. and/or its affiliates in the U.S.
and certain other countries. Copyright © 2005
Cisco Systems, Inc. All rights reserved.
WMP55AG-EU-LA-UK_V1.2-QIG-50107NC JL