Display Options; Loop Overview; Main Loop - meibes Rossweiner logoplus Guia De Instalacion

7. Display options

7.1 Loop overview

The LC display has a power save mode. The display is activated by pressing a button and shows the accumulated
energy since initial operation = basic display. The display switches off automatically and changes to the power save
mode if the button is not pressed for 5 minutes. The meter continues measuring without a fault.
• Continue by pressing button < 3 seconds.
• Switch from main loop to service loop by pressing button > 3 seconds.
52

Main loop

Display 1
Display 2
..............
Service loop
Display S1
Display S2
..............