JB Systems DJ-Kontrol 3S Manual De Instrucciones página 9

ENGLISH
 In play mode: the wheel acts as pitch bend.
 In loop mode: press SHIFT-button (38) while turning the
JOG-wheel to move the position of the playing loop.
 Scratch button (24) lit: with the scratch function enabled,
the wheel allows you to scratch the track much like a vinyl
record. To increase the vinyl feeling, the jog wheel is touch
sensitive: this means that playback will stop as soon as you
put your hand on the wheel.
 Scratch
button (24) blinking:
browse/search the entire track at high speed.
24. SCRATCH button: different functions are possible:
 Press shortly: to toggle between browse mode (button not
lit) and scratch mode (button lit) for the jog wheel (23).
 Press for 0,5sec: to activate/de-activate the high speed
browse/search function for the jog wheel (23). While
activated you can search the entire track at very high
speed.
25. SYNC button: used to synchronize the loaded track
automatically to the track playing on the other deck. Pressing
the SYNC-button together with the SHIFT-button (38) allows
you start your track immediately in sync with the track playing
on the other deck. (also named "sync-start")
26. LOOP IN button: different functions available:
 No loop is playing: press the LOOP IN button to set the
intro point of a manual loop.
 A loop is playing: press the LOOP IN button to retrigger
the playing loop (stutter effect).
27. LOOP OUT button: different functions available:
 No loop is playing: press the LOOP OUT button to set the
end point of a manual loop, the loop starts playing
immediately.
 A loop is playing: press the LOOP OUT button to leave
the playing loop.
28. RELOOP button: while the loop is playing, press the RELOOP button to re-start the loop immediately
(stutter effect). When no loop is playing: press the RELOOP button to enter the last played loop again.
29. SMART LOOP 2/1: press this button to create an automatic 2/1-beat smart loop.
30. SMART LOOP 4/1: press this button to create an automatic 4/1-beat smart loop.
31. SMART LOOP 8/1: press this button to create an automatic 8/1-beat smart loop.
32. LOOP CUT/JUMP button: two different functions available:
 LOOP CUT: press this button to cut the length of the playing loop in two.
 LOOP JUMP: press this button while the SHIFT-button (38) is pressed to let the playing loop move
(or jump) 2beats back in the track.
33. LOOP DOUBLE/JUMP button: two different functions available:
 LOOP DOUBLE: press this button to double the length of the playing loop.
 LOOP JUMP: press this button while the SHIFT-button (38) is pressed to let the playing loop move
(or jump) 2beats forward in the track.
34. PITCH button: two different functions available:
 Press PITCH button: used to change the range of the pitch fader: 6, 10, 20, 50 or 100%.
 Press PITCH+SHIFT button: switches the speed lock function on/off. When speed lock is on, the
speed faders of both players are locked: they move
35. SPEED FADER: used to change the playback speed of the playing track.
36. PITCH BEND buttons: The speed rises while the "+ button" is pressed and returns to the original pitch
when the button is released. The speed drops when the "– button" is pressed and returns to the original
pitch when the button is released. These buttons can be used to manually synchronize the beats of 2
tracks.
37. HOT CUE buttons: used to set 3 different hot cue points.
 Store a cue point: when no cue point is stored, the button is dark  press the CUE-button to store
the desired cue point. (cue points are automatically re-called when you load the track again)
 Play from a cue point: when a cue point is stored, the button is lit  press the CUE-button to start
playback immediately from the stored cue point.
JB SYSTEMS
®
turn the wheel to
together.
7/58
USER MANUAL
DJ-KONTROL 3S