Gree XK76 El Manual Del Propietario página 14

3.7.8 Save Function Setting
After entering user function page, press "∧" or "∨" button to select save function
and press "＜" or "＞" button to turn on or turn off save function. Press MENU button to
enter save function setting page.
After entering save function setting page, press "＜" or "＞" button to select cooling
or heating limitation temperature. After selecting cooling or heating limitation
temperature, press "∧" or "∨" button to adjust limitation temperature value. After
setting, press MENU button to save the setting.
Note:
When save function has been set, auto mode cannot be set.
3.7.9 Auxiliary Heating Function Setting
After entering user function page, press "∧" or "∨" button to select auxiliary
heating function and press "＜" or "＞" button to turn on or turn off this function with auto
saving.
3.7.10 X-fan Function Setting
After entering user function page, press "∧" or "∨" button to select dry function
option and press "＜" or "＞" button to turn on or turn off this function with auto saving.
Note:
●
This function is only available in cooling mode and dry mode.
●
When this function is on, if the air conditioner is turned off, the indoor fan will
still operate at low speed for a while to blow the residual water inside the air
duct.
3.7.11 Quiet Function Setting
After entering user function page, press "∧" or "∨" button to select quiet function
and press "＜" or "＞" button to turn on or turn off this function with auto saving.
Note:
This function is only available in cooling mode, heating mode and auto
mode.
3.7.12 Fahrenheit Temperature Setting
After entering user function page, press "∧" or "∨" button to select Fahrenheit
temperature function and press "＜" or "＞" button to turn on or turn off this function
with auto saving. After closing this function, Celsius temperature will be displayed.
Wired Controller XK76 Owner's Manual
11