On/Off; Mode Setting; Temperature Setting; Fan Setting - Gree XK76 El Manual Del Propietario

Wired Controller XK76 Owner's Manual

3.2 On/Off

When the wired control is on main page, press ON/OFF button to turn on the unit.
Press ON/OFF button again to turn off the unit. The interfaces of On/Off status are
shown in Fig. 4 and Fig. 5.
Fig. 4 Off interface

3.3 Mode Setting

Under On status, pressing MODE button can set mode circularly as:
Note:
If save function is on, auto mode is not available.

3.4 Temperature Setting

Under unit on status, pressing "∧" or "∨" button on the main page increases or
decreases set temperature by 1℉(1℃); holding "∧" or "∨" button increases or
decreases set temperature by 1℉(1℃) every 0.3s.
In cooling,dry,fan and heating mode,temperature setting range is 61℉~86℉
(16℃～30℃). Under auto mode, set temperature cannot be adjusted.

3.5 Fan Setting

Under On status, pressing FAN button can set fan speed circularly as:
Low→Medium→High→Turbo→Auto→Low
Symbols displayed are as shown in Fig. 6.
(AUTO) (COOLING) (DRY)
Fig. 6 Fan setting
Fig. 5 On interface
(FAN) (HEATING)
TURBO AUTO
5