Installation Of The Appliance - TESY MC 2015 Instrucciones De Uso Y Almacenamiento

•
The most common cause of overheating is fluff and
EN
dust deposits in the appliance. Clean the ventilation
openings regularly with a vacuum cleaner. Before
that disconnect the power plug from the socket.
•
Never touch the appliance with damp or wet hands
– there is danger for your life!
•
The power socket must be easily accessible all the
time in case the power plug has to be disconnected
as fast as possible! Never pull the power cord or the
appliance itself in order to disconnect it from the
mains.
•
ATTENTION! Outgoing air gets hot during operation
(up to more than 100°C).
•
If the power cord of this appliance gets damaged,
stop its operation and call its supplier/retailer for
advice about repair in local service centre.
•
Do not cover the appliance. If the appliance gets
covered, there is risk of overheating.
•
If the appliance is damaged or does not work
properly, stop it and do not repair it yourself. For
any kind of repairs call for assistance an after-sale
service centre. This is the place where you will have
your broken part replaced with an original one.
Non-adherence to this instruction will compromise
the appliance safety.
•
If you decide to stop using such kind of appliance,
it is advisable to render it unusable by cutting its
power cord after disconnecting it from the mains. It
is advisable all possible risks related to the appliance
to be secured, especially in relation to children that
may play with out-of-use appliances.
•
Never keep the appliance unnecessarily switched
on. Disconnect it from the power socket when you
do not intend to use it for a long period of time.
•
The appliance should not be positioned right under
a power socket!
•
Warning: Do not use this appliance with a
programming device, counter or any other device
which can automatically switch it on because if the
appliance is covered or improperly positioned this
may cause fire.
•
Position the power cord in such a way that it does
not obstruct the free movement of people and
cannot be stepped on! Use only approved extension
cords which are suitable for this appliance, i.e. have
got a conformity sign!
•
Never move the appliance by pulling its power cord
and do not use the power cord for carrying objects!
•
Do not bend the power cord and do not stretch it
over sharp edges, do not position it over hot plates
or open flames!
•
Never use this appliance in close proximity to
wet premises – bathroom, a shower cabin or a
swimming pool!
This appliance is intended only for drying textiles
washed in water.
4
Usage and Storage Instructions
PACKING
•
After unpacking the appliance, check if all its
elements are included in the packing and that it has
not been damaged during transportation! In case
damage or incomplete delivery is found, contact
your authorized retailer!
•
Do not throw away the original packing! It could
be used for storage and transportation purposes in
order to avoid damages during transportation!
•
Disposal of packing materials should be done in
the appropriate way! Children should be prevented
from playing with polyethylene bags!

INSTALLATION OF THE APPLIANCE

Free standing position
•
Attach the two plastic feet to the base of the panel heater
•
Use a suitable tool to fix the feet by means of 3
screws which are included in the appliance set;
•
Place the panel heater into a proper working
position before connecting it to the power supply;
•
Choose a suitable place for the appliance, taking
into account the safety instructions;
MAINTENANCE
•
Turn the thermostat switch clockwise (to the right)
until it gets to its final position.
•
Reduced power heating: turn the switch (to the
right) to setting І (1200W).
•
Full power heating: turn the switch (to the right) to
setting ІІ (2000W).
•
Turning-off: turn the switch (to the left) to setting
OFF
Thermostat
1200W
2000W