Moving The Appliance - TESY CN204ZF Manual De Operación Y Mantenimiento

in case the desired room temperature can not be
EN
achieved, an additional panel heater needs to be
operated). You can turn the thermostat knob
clockwise to maximum power and when the desired
room temperature is achieved you have to turn it
counter-clockwise slowly until you hear a "ticking"
sound. Then the appliance will maintain the air
temperature in the room at the adjusted level by
switching on and off automatically.
•
The appliance has got an in-built anti-frost function.
In case you decide to use the appliance in a room,
where minimum temperature is to be maintained
(winter gardens, cellars or attics), the appliance
has to be adjusted to the desired heating level
(level I, level II or both), the thermostat knob has
to be turned counter -clockwise until it reaches
the smallest indicator circle . In this position the
appliance will maintain room temperature in the
range of 5±2°С, i.e. it will periodically switch on and
off, maintaining the adjusted level of temperature
comfort in the room.
•
Panel heater CN204ZF is equipped with an
additional Turbo function, which can be
controlled by a separate switch – Fan
switch. Turbo function assists panel heater
in faster achievement of desired room
temperature.
•
The available power levels are presented
indicatively. It is compulsory for the appliance to
be secured when positioned in a room without
supervision. The appliance electric installation has
to be equipped with an automatic safety fuse; with
a distance between its contacts in disconnected
state of at least 3 mm.

MOVING THE APPLIANCE:

If the appliance has to be moved, switch it off by the
Heater switch. Take the power plug out of the power
socket and then, holding the appliance handles with
both hands, move it to its new position, having in mind
that the appliance must get cold (cooled down) before
doing this. Moving hot appliances may lead to undesired
consequences for the user like burns or inflammable
materials entering the panel heater during its movement.
4
Usage and Storage Instructions
– turned-off, - turned-on
Fan switch
Heater switch
Thermostat knob
CLEANING
•
It is compulsory first to switch off the appliance and
disconnect its power cord from the socket. Before
starting cleaning the panel heater you should wait
until it cools down after disconnecting it from the
power socket.
•
Clean the body of the appliance with a damp cloth,
vacuum cleaner or soft brush.
•
Never immerse the appliance into water – there is
danger to your life from electric shock!
•
Never use petrol, thinner or coarse abrasive
products for cleaning because they will damage the
surface coating of the appliance.
STORAGE
•
Before putting away the panel heater let it cool
down after disconnecting it from the power socket.
•
Use the original packing for storing the panel heater
if it will not be used for a certain period of time. The
product can be protected from excessive dust and
dirt when it is kept in its original packing.
•
Never put a hot appliance into its packing!
•
The product has to be stored at a dry place away
from direct sunlight.
•
It is explicitly forbidden to store the appliance in
wet or damp premises.
PRODUCT PACKING SET INCLUDES:
Panel heater
Feet
Feet fixing screws
Manual
Guarantee certificate
TECHNICAL CHARACTERISTICS OF THE
APPLIANCE:
Model Rated power
CN204ZF 2000W
Warning: in order to avoid overheating,
do not cover the appliance!
Environment protection instructions
Old electric appliances contain valuable materials
and therefore should not be disposed of as domestic
waste! We ask you for your active cooperation to
protect the resources and the environment by
submitting your appliance to organized buy-back
stations (if there are such).
1 pc.
2 pcs.
2 pcs.
1 pc.
1 pc.
Rated voltage Rated
frequency
230V~ 50Hz